Page History
...
iRely supports Windows Server 2012 R2 (we recommend 2016 for new customers)
- Completed testing for Microsoft Windows Server 2016 for i21 but not Origin.
- Microsoft SQL Server 2014 Standard minimum (previous versions will not be supported in versions of iRely 18.x and above)
- Completed testing SQL Server 2017 for i21 but not Origin.
- iRely recommends the use of RAID(1, 5, 10) disks in all servers
- 1-10 Named Users - 32 64 GB RAM, 500 GB Drive Space, SATA hard drives, Xeon processor
- 11- 49 Named Users – 32 64 GB RAM, 600 GB Drive Space, SAS hard drives, Xeon processor
- 50+ Named Users – Dual Server architecture(either physical or VMWare/Hyper-V); SQL Server & Application Server
- due to higher memory requirements, Server 2012 Enterprise or Server 2016 Standard or above are required
- SQL Server – 48 GB RAM (32 GB allocated to SQL instance), 800 GB (200 GB C:\ and 600 GB D:\) of disk space, Xeon processor
- Application Server – 48 GB RAM, 800 GB (200 GB C:\ and 600 GB D:\) of disk space, Xeon processor
- Use of SSD hard drives in RAID 5 or RAID 10 with Hot Spares
- prefer higher number of smaller drives to larger number of high density drives
- The above specifications are designated with physical servers in mind. If you are using virtualization (VMware or Hyper-V) you can designate these values to start with, virtualization allows you to change these settings quickly with minimal downtime:
- 4 logical processors per server
- 32 GB of RAM each for the dedicated servers, or 64 GB if application and database reside on same machine
- C:\ 150 200 GB (where the applications will be stored)
- D:\ 300 600 GB (where the database files will reside and other temporary storage)
- If you have Portal Users, you need to be sure to license your Microsoft SQL server using Core licensing. These licenses are sold in packs of 2. Contact your vendor for pricing.
- iRely does not support installing our applications on Domain controllers (Note from Microsoft:
“It is not recommended to install SQL Server on a domain controller. There are specific security restrictions when running SQL Server in this configuration and given the resource demands of a domain controller, SQL Server performance may be degraded.”), Exchange Servers, Foundation Edition or Windows Server Essentials aka Small Business Server(SBS)
- It is recommended that the software data is hosted on a separate partition from the operating system. Typical setup would be C:\ drive for operating system and applications, and D:\ drive for iRely databases and files.
- Reserve at least 200GB of space for the C:\ drive to allow installation of applications.
...
- iRely uses ScreenConnect by ConnetWise (https://www.screenconnect.com) for administration of servers and remote diagnostics with end users
- ScreenConnect uses 256-bit AES encryption for every session and is HIPAA and PCI compliant
- iRely uses the unattended remote client on the client Windows servers during install and also for remote troubleshooting
- iRely also uses the remote support client to connect with end users to help with troubleshooting
- End users call in to support line and are given a code, once the code is input the end users downoads downloads the client. This creates a secure session and we are able to interface with end user desktop
...
Discontinued Models - still supportedCurrent Models | Notes | |
HP LaserJet P2055 | ||
HP LaserJet P1606DN (DN model only, Low Volume) | ||
HP LaserJet CP3523 Series | HP LaserJet Pro 400 M401/M402 Series (Medium Volume) | |
CP3523 Series | For Origin, as a general rule (kiosk printers do not apply), printers should be PCL 5 / PCL 6 compatible for standard printing. | |
HP LaserJet 4000 Series | Most HP business grade printers support PCL5 / PCL 6 | |
HP LaserJet 4100 Series | Manufacturer specific emulations for PCL or Postscript are not supported (Example: Kyocera KPDL, Brother BR-Script) | |
HP LaserJet P2015 | HP LaserJet 4000 Series | |
Dell E310dw Laser (Low Volume, 4,000 per month) | HP LaserJet 4100 Series | |
Dell S2830dn Laser (Medium Volume, 10,000 per month) | HP LaserJet P2015||
Dell S5830dn Laser (High Volume, 30,000 per month) | ||
Dell H815dw Multi-function Laser (Medium Volume, 4,000 per month) | ||
Dell H825cdw Color Multi-function Laser (3,000 per month) | ||
Printers in bold are recommended because they are used for testing at our headquarters | ||
Scale Kiosk Printers (outdoor) | ||
80mm width thermal printers | Zebra TTP2000 & TTP3000 models (Discontinued) Epson EU-T482 & EU-T483 models (Discontinued) Star TUP542 model (Serial) Custom VPK80II SX (Ethernet 80mm) | |
112mm width thermal printers | At this time, only Zebra, Swecoin, and Telpar printers are supported for 112mm width paper. The industry is phasing out these paper sizes. We recommend 80mm width. | |
Full Page Kiosk thermal printer | Custom KPM216HII (Ethernet Full Page) | |
Any other outdoor ticket printers will require testing and possible custom coding to work. | Custom coding comes at an additional charge.
| |
Point of Sale (POS) Receipt Printers | ||
Impact Model | Star Micronics SP742ML US
| |
Thermal Model | Star Micronics TSP654IIE3-24 GRY US
| |
Barcode Printers | ||
Thermal Models | Zebra GC420D (entry level) | |
Zebra GK420D (advanced level) | ||
Zebra GX420D (performance model) | ||
MICR Check Printers | ||
(Low volume 250 - 2,500 checks monthly) | Troy M203 MICR | |
(Medium volume 750 - 4,000 checks monthly) | Troy M402N MICR | |
(Large volume 2,000 - 7,500 checks monthly) | Troy M506DN | |
Each printer is different, some printers require a MICR drum and toner to print checks. For best results contact Troy Security Solutions at https://shop.troygroup.com/ |
- ALL other printers will need to be individually evaluated. Compatibility is not guaranteed. iRely will work with you to ensure that printing is done to the best of your printers ability. We have seen issues with the HP LaserJet P2035 series, HP LaserJet P3015, and HP Laserjet 600 Series
As a general rule (kiosk printers do not apply), printers should be PCL 5/PCL 6 compatible for standard printing. Postscript(PDL) compatible for pdf(eForms) printing. Manufacturer specific emulations for PCL or Postscript are not supported (Example: Kyocera KPDL, Brother BR-Script) - Please be aware, printer manufacturers release updates to firmware that are out of the control of iRely. These firmware updates may alter the capability or behavior of the printer.
- ALL other printers will need to be individually evaluated. Compatibility is not guaranteed. iRely will work with you to ensure that printing is done to the best of your printers ability. We have seen issues with the HP LaserJet P2035 series, HP LaserJet P3015, and HP Laserjet 600 Series
C-Store Scanner Hardware
Scanners will require Wifi, Windows, Barcode Scanner (1&2D)
https://www.barcodesinc.com/motorola/mc3200.htm
https://www.amazon.com/Motorola-MC32N0-SI4HCLE0A-MC3200-Part/dp/B00NL91S3U
POS Scanner
Honeywell Voyager 1202g
AG & Grain Inventory Scanner Hardware
Zebra TC-8000 (these are Android based scanners)
Recommended Energy Trac Hardware
Any Windows 8.1+ tablet or laptop should be supported. If you have something in mind, let us know so we can verify compatibility. Here are some recommendations.
Mobile Demand xTablet Flex 10
https://www.ruggedtabletpc.com/products/xtablet-flex-10
Mobile Demand also carries the truck mount hardware. You will want a base to attach the tablet to.
Supported Meters
- LCR II
- LCR 600
- MidCom 8000
- MidCom eCount
- MidCom Smartlink
iRely recommends LCR for best features, integration and ease of use.
Meter Connectivity
To connect to a meter the tablet or laptop will need either a direct serial port, or usb ports for a USB to serial cable. iRely recommends the Cables 2 Go USB to Serial adapter 26886
http://www.amazon.com/C2G-Cables-26886-Serial-Adapter/dp/B000067RVJ
Additional serial cables will be needed to connect to the meter and/or printer. They type will depend on which meter will be used.
Supported Printers
We support either the Okidata Microline 184/186, or the Brother Pocketjet 6. iRely recommends the Pocketjet.
Printer: Brother Pocketjet 6. Part number PJ662-K
https://www.amazon.com/Brother-PocketJet-PJ-662-Printer-PJ662/dp/B004OJESE2
Roll paper Part Number: LB3662
In Truck Mount from RAM Mounts. http://www.rammount.com/part/RAM-VPR-101-1
Attaches to a pole base
There is a company that can pre print Duty to Warn on the paper, or other custom formats.
Micro Format, Inc.
830-3 SETON COURT
WHEELING, IL 60090
800-333-0549
www.pocketjetpaper.com
Revised 804/804/20182019