The Budget column is used to show budget amounts configured from the Budget Import Budget from CSV (Obsolete in 15.3 and above) and can even be filtered by date.
Follow these steps to add a budget column.
- A new row will be available in the grid section.
- In the Column Type field, select Budget.
- In the Column Name field, enter the name you would like to call the column. The value entered in this field may show on your financial report, granted the Caption field for that column is set to Column Name. This is discussed more on How to Add Column Name Row.
- In the Caption field, select the type of caption you want for the column. This is discussed more on How to Add Column Name Row.
- The Start Offset field will be defaulted to BOT, which stands for Beginning of Time. This field is read only to prevent you from modifying it.
- The End Offset field will be defaulted to -1, which stands for Run Date minus 1 month or the previous month. Change this field when you need to.
*When Start Offset and End Offset are combined, it is read as From Beginning of Time up to Previous Month. This is discussed more on How Start and End Offset works.
- The Start Date field will show the date based on the Start Offset selected and the Run Date. This gives you a preview of what the Start Date will be. It is only when Custom is selected in the Start Offset field where you need to specify the date. The rest are computed by the system.
- The End Date field will show the date based on the End Offset selected and the Run Date. This gives you a preview of what the End Date will be. It is only when Custom is selected in the End Offset field where you need to specify the date. The rest are computed by the system.
- Leave the Column Calculation field blank.
- The Segment Filter field is useful to this column type since it allows you to specify location/s filter if you need to. This is discussed more on How to Use Segment Filter in the Column Designer.
- Select a budget from the Budget Code field.
- Leave the Percentage field blank.
- In the Width field, set it to your desired column width. By default it is set to 160 pixels, which is approximately 1 1/4 inches.
- In the Alignment field, set how the value for the column be displayed.
- Select Center if you want it Centered
- Select Left if you want it Left Aligned
- Select Right if you want it Right aligned
- There is an ability to show or hide the column. Check the Hidden checkbox if you decide to hide the column. This is discussed more on How Hidden checkbox works when enabled.
- All other fields are not anymore necessary so you can leave those out.
This is how Budget column will look like when you follow the above steps.
Image Added
Here's how it is shown when report is previewed/printed. Highlighted is the Budget column type.
Image Added
Expand |
---|
|
The Budget column is used to show budget amounts configured from the Budget Import Budget from CSV (Obsolete in 15.3 and above) and can even be filtered by date. Follow these steps to add a budget column. - A new row will be available in the grid section.
- In the Column Type field, select Budget.
- In the Column Name field, enter the name you would like to call the column. The value entered in this field may show on your financial report, granted the Caption field for that column is set to Column Name. This is discussed more on How to Add Column Name Row.
- In the Caption field, select the type of caption you want for the column. This is discussed more on How to Add Column Name Row.
- The Start Offset field will be defaulted to BOT, which stands for Beginning of Time. This field is read only to prevent you from modifying it.
- The End Offset field will be defaulted to -1, which stands for Run Date minus 1 month or the previous month. Change this field when you need to.
*When Start Offset and End Offset are combined, it is read as From Beginning of Time up to Previous Month. This is discussed more on How Start and End Offset works.
- The Start Date field will show the date based on the Start Offset selected and the Run Date. This gives you a preview of what the Start Date will be. It is only when Custom is selected in the Start Offset field where you need to specify the date. The rest are computed by the system.
- The End Date field will show the date based on the End Offset selected and the Run Date. This gives you a preview of what the End Date will be. It is only when Custom is selected in the End Offset field where you need to specify the date. The rest are computed by the system.
- Leave the Column Calculation field blank.
- The Segment Filter field is useful to this column type since it allows you to specify location/s filter if you need to. This is discussed more on How to Use Segment Filter in the Column Designer.
- Select a budget from the Budget Code field.
- Leave the Percentage field blank.
- In the Width field, set it to your desired column width. By default it is set to 160 pixels, which is approximately 1 1/4 inches.
- In the Alignment field, set how the value for the column be displayed.
- Select Center if you want it Centered
- Select Left if you want it Left Aligned
- Select Right if you want it Right aligned
- There is an ability to show or hide the column. Check the Hidden checkbox if you decide to hide the column. This is discussed more on How Hidden checkbox works when enabled.
- All other fields are not anymore necessary so you can leave those out.
This is how Budget column will look like when you follow the above steps.
Image Added Here's how it is shown when report is previewed/printed. Highlighted is the Budget column type.
Image Added |
Expand |
---|
|
The Budget column is used to show budget amounts configured from the Budget Import Budget from CSV (Obsolete in 15.3 and above) and can even be filtered by date. Follow these steps to add a budget column. - A new row will be available in the grid section.
- In the Column Type field, select Budget.
- In the Column Name field, enter the name you would like to call the column. The value entered in this field may show on your financial report, granted the Caption field for that column is set to Column Name. This is discussed more on How to Add Column Name Row.
- In the Caption field, select the type of caption you want for the column. This is discussed more on How to Add Column Name Row.
- The Start Offset field will be defaulted to BOT, which stands for Beginning of Time. This field is read only to prevent you from modifying it.
- The End Offset field will be defaulted to -1, which stands for Run Date minus 1 month or the previous month. Change this field when you need to.
*When Start Offset and End Offset are combined, it is read as From Beginning of Time up to Previous Month. This is discussed more on How Start and End Offset works.
- The Start Date field will show the date based on the Start Offset selected and the Run Date. This gives you a preview of what the Start Date will be. It is only when Custom is selected in the Start Offset field where you need to specify the date. The rest are computed by the system.
- The End Date field will show the date based on the End Offset selected and the Run Date. This gives you a preview of what the End Date will be. It is only when Custom is selected in the End Offset field where you need to specify the date. The rest are computed by the system.
- Leave the Column Calculation field blank.
- The Segment Filter field is useful to this column type since it allows you to specify location/s filter if you need to. This is discussed more on How to Use Segment Filter in the Column Designer.
- Select a budget from the Budget Code field.
- Leave the Percentage field blank.
- In the Width field, set it to your desired column width. By default it is set to 160 pixels, which is approximately 1 1/4 inches.
- In the Alignment field, set how the value for the column be displayed.
- Select Center if you want it Centered
- Select Left if you want it Left Aligned
- Select Right if you want it Right aligned
- There is an ability to show or hide the column. Check the Hidden checkbox if you decide to hide the column. This is discussed more on How Hidden checkbox works when enabled.
- All other fields are not anymore necessary so you can leave those out.
This is how Budget column will look like when you follow the above steps.
Image Added Here's how it is shown when report is previewed/printed. Highlighted is the Budget column type.
Image Added |
Expand |
---|
|
The Budget column is used to show budget amounts configured from the Budget Import Budget from CSV (Obsolete in 15.3 and above) and can even be filtered by date. Follow these steps to add a budget column. - A new row will be available in the grid section.
- In the Column Type field, select Budget.
- In the Column Name field, enter the name you would like to call the column. The value entered in this field may show on your financial report, granted the Caption field for that column is set to Column Name. This is discussed more on How to Add Column Name Row.
- In the Caption field, select the type of caption you want for the column. This is discussed more on How to Add Column Name Row.
- The Start Offset field will be defaulted to BOT, which stands for Beginning of Time. This field is read only to prevent you from modifying it.
- The End Offset field will be defaulted to -1, which stands for Run Date minus 1 month or the previous month. Change this field when you need to.
*When Start Offset and End Offset are combined, it is read as From Beginning of Time up to Previous Month. This is discussed more on How Start and End Offset works.
- The Start Date field will show the date based on the Start Offset selected and the Run Date. This gives you a preview of what the Start Date will be. It is only when Custom is selected in the Start Offset field where you need to specify the date. The rest are computed by the system.
- The End Date field will show the date based on the End Offset selected and the Run Date. This gives you a preview of what the End Date will be. It is only when Custom is selected in the End Offset field where you need to specify the date. The rest are computed by the system.
- Leave the Column Calculation field blank.
- The Segment Filter field is useful to this column type since it allows you to specify location/s filter if you need to. This is discussed more on How to Use Segment Filter in the Column Designer.
- Select a budget from the Budget Code field.
- Leave the Percentage field blank.
- In the Width field, set it to your desired column width. By default it is set to 160 pixels, which is approximately 1 1/4 inches.
- In the Alignment field, set how the value for the column be displayed.
- Select Center if you want it Centered
- Select Left if you want it Left Aligned
- Select Right if you want it Right aligned
- There is an ability to show or hide the column. Check the Hidden checkbox if you decide to hide the column. This is discussed more on How Hidden checkbox works when enabled.
- All other fields are not anymore necessary so you can leave those out.
This is how Budget column will look like when you follow the above steps.
Image Added Here's how it is shown when report is previewed/printed. Highlighted is the Budget column type.
Image Added |
Expand |
---|
|
The Budget column is used to show budget amounts coming from Import Budget from CSV (Obsolete in 15.3 and above) and can even be filtered by date. Follow these steps to add a budget column. - A new row will be available in the grid section.
- In the Column Description field, enter the name you would like to call the column. The value entered in this field may show on your financial report, granted the caption for that column is set to Column Header. This is discussed more on How to Add Description Title Row.
- In the Caption field, select the type of caption you want for the column. This is discussed more on How to Add Description Title Row.
- In the Column Type field, select Budget.
- In the Filter Type field, select a date filter for the column. This is discussed more on How Filter Type works.
- Leave the Related Columns field blank.
- Leave the Segment Used field blank.
- In the Budget Code field, select from the budget codes imported. The selected budget code here will be used for this specific column.
- The Start and End Date fields are to be used only on column that has Filter Type of Custom. This is discussed more on How Filter Type works.
- In the Width field, set it to your desired column width. By default it is set to 160 pixels, which is approximately 1 1/4 inches.
- In the Alignment field, set how the value for the column be displayed.
- Select Center if you want it Centered
- Select Left if you want it Left Aligned
- Select Right if you want it Right aligned
- In the Format field, assign how the numbers be shown in the column. Will it have decimals, money sign or in percentage format.
- Leave the Hidden checkbox unchecked. See How Hidden checkbox works when enabled.
This is how Budget column will look like when you follow the above steps.
Image Added This is how it will be shown when you print your financial report with this column type. Image Added
|
Expand |
---|
|
The Budget column is used to show budget amounts coming from Import Budget from CSV (Obsolete in 15.3 and above) and can even be filtered by date. Follow the steps below to add a budget column. - A new row will be available in the grid section.
- In the Column Header field, enter the name you would like to call the column. The value entered in this field may show on your financial report, granted the caption for that column is set to Column Header. This is discussed more on How to Add Description Title Row.
- In the Caption field, select the type of caption you want for the column. This is discussed more on How to Add Description Title Row.
- In the Column Type field, select Budget.
- In the Filter Type field, select a date filter for the column.
- Leave the Related Columns field blank.
- Leave the Segment Used field blank.
- In
|
...
- the Budget Code field, select from the budget codes imported. The selected budget code here will be used for this specific column.
- The Start and End Date fields are to be used only on column that has Filter Type of Custom. This is discussed more on Filter Type - Custom.
- In the Width field, set it to your desired column width. By default it is set to 160 pixels, which is approximately 1 1/4 inches.
- In the Alignment field, set how the value for the column be displayed.
- Select Center if you want it Centered
- Select Left if you want it Left Aligned
- Select Right if you want it Right aligned
- In the Format field, assign how the numbers be shown in the column. Will it have decimals, money sign or in percentage format.
- Leave the Hidden checkbox unchecked. See How Hidden checkbox works when enabled.
This is how Budget column will look like when you follow the above steps.
Image Modified This is how it will be shown when you print your financial report with this column type. |
...
Image Added
|